Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate
Sign In | Create Account

Paste Actions

Download Raw
Embed
pBox URL
Post to Twitter
Trackback (7)
Remove Paste

Paste Details

Raw format, 4 years 3 months old, and 98 hits.

Someone
Saturday, November 3rd, 2007 at 12:25:14am MDT 

  1. Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
  2. Command line: root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ06X1W-part6 vga=0x314 resume=/dev/sda5 splash=silent
  3. BIOS-provided physical RAM map:
  4.  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  5.  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  6.  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  7.  BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
  8.  BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
  9.  BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
  10.  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  11.  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  12.  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  13.  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  14.  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  15.  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  16. Entering add_active_range(0, 0, 159) 0 entries of 3200 used
  17. Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
  18. end_pfn_map = 1048576
  19. DMI present.
  20. ACPI: RSDP 000F7B40, 0024 (r2 Compal)
  21. ACPI: XSDT 7FED87B0, 008C (r1 Compal CRESTLNE  6040000  LTP        0)
  22. ACPI: FACP 7FEDFBD2, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
  23. ACPI: DSDT 7FED9B9F, 5FBF (r2 Compal CRESTLNE  6040000 INTL 20061109)
  24. ACPI: FACS 7FEE2FC0, 0040
  25. ACPI: APIC 7FEDFCC6, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  26. ACPI: HPET 7FEDFD2E, 0038 (r1 Compal CRESTLNE  6040000 LOHR       5A)
  27. ACPI: MCFG 7FEDFD66, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  28. ACPI: TCPA 7FEDFDA2, 0032 (r1 Intel  CRESTLNE  6040000 LOHR       5A)
  29. ACPI: TMOR 7FEDFDD4, 0026 (r1 PTLTD            6040000 PTL         3)
  30. ACPI: SLIC 7FEDFDFA, 0176 (r1 Compal CRESTLNE  6040000 TBD         1)
  31. ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD      APIC    6040000  LTP        0)
  32. ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
  33. ACPI: SSDT 7FED98DA, 02C5 (r1 SataRe SataAhci     1000 INTL 20050624)
  34. ACPI: SSDT 7FED8DC8, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
  35. ACPI: SSDT 7FED8D22, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
  36. ACPI: SSDT 7FED883C, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
  37. ACPI: BIOS bug: multiple APIC/MADT found, using 0
  38. ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
  39. No NUMA configuration found
  40. Faking a node at 0000000000000000-000000007fed0000
  41. Entering add_active_range(0, 0, 159) 0 entries of 3200 used
  42. Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
  43. Bootmem setup node 0 0000000000000000-000000007fed0000
  44. Zone PFN ranges:
  45.   DMA             0 ->     4096
  46.   DMA32        4096 ->  1048576
  47.   Normal    1048576 ->  1048576
  48. early_node_map[2] active PFN ranges
  49.     0:        0 ->      159
  50.     0:      256 ->   523984
  51. On node 0 totalpages: 523887
  52.   DMA zone: 56 pages used for memmap
  53.   DMA zone: 1271 pages reserved
  54.   DMA zone: 2672 pages, LIFO batch:0
  55.   DMA32 zone: 7107 pages used for memmap
  56.   DMA32 zone: 512781 pages, LIFO batch:31
  57.   Normal zone: 0 pages used for memmap
  58. ACPI: PM-Timer IO Port: 0x1008
  59. ACPI: Local APIC address 0xfee00000
  60. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  61. Processor #0 (Bootup-CPU)
  62. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  63. Processor #1
  64. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  65. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  66. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  67. IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
  68. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  69. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  70. ACPI: IRQ0 used by override.
  71. ACPI: IRQ2 used by override.
  72. ACPI: IRQ9 used by override.
  73. Setting APIC routing to flat
  74. ACPI: HPET id: 0x8086a201 base: 0xfed00000
  75. Using ACPI (MADT) for SMP configuration information
  76. swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  77. swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
  78. swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
  79. Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
  80. SMP: Allowing 2 CPUs, 0 hotplug CPUs
  81. PERCPU: Allocating 50296 bytes of per cpu data
  82. Built 1 zonelists.  Total pages: 515453
  83. Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST9120823AS_5NJ06X1W-part6 vga=0x314 resume=/dev/sda5 splash=silent
  84. bootsplash: silent mode.
  85. Initializing CPU#0
  86. PID hash table entries: 4096 (order: 12, 32768 bytes)
  87. Extended CMOS year: 2000
  88. Marking TSC unstable due to TSCs unsynchronized
  89. time.c: Detected 2394.019 MHz processor.
  90. Console: colour dummy device 80x25
  91. Checking aperture...
  92. Calgary: detecting Calgary via BIOS EBDA area
  93. Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  94. Memory: 2057212k/2095936k available (2049k kernel code, 38336k reserved, 1018k data, 316k init)
  95. Calibrating delay using timer specific routine.. 4792.44 BogoMIPS (lpj=9584892)
  96. Security Framework v1.0.0 initialized
  97. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  98. Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  99. Mount-cache hash table entries: 256
  100. CPU: L1 I cache: 32K, L1 D cache: 32K
  101. CPU: L2 cache: 4096K
  102. CPU 0/0 -> Node 0
  103. using mwait in idle threads.
  104. CPU: Physical Processor ID: 0
  105. CPU: Processor Core ID: 0
  106. CPU0: Thermal monitoring handled by SMI
  107. SMP alternatives: switching to UP code
  108. Unpacking initramfs... done
  109. Freeing initrd memory: 4369k freed
  110. ACPI: Core revision 20070126
  111. Parsing all Control Methods:
  112. Table [DSDT](id 0001) - 962 Objects with 69 Devices 175 Methods 27 Regions
  113. Parsing all Control Methods:
  114. Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions
  115. Parsing all Control Methods:
  116. Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
  117. Parsing all Control Methods:
  118. Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
  119. Parsing all Control Methods:
  120. Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
  121.  tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
  122. evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
  123. Using local APIC timer interrupts.
  124. result 12468835
  125. Detected 12.468 MHz APIC timer.
  126. SMP alternatives: switching to SMP code
  127. Booting processor 1/2 APIC 0x1
  128. Initializing CPU#1
  129. Calibrating delay using timer specific routine.. 4788.11 BogoMIPS (lpj=9576224)
  130. CPU: L1 I cache: 32K, L1 D cache: 32K
  131. CPU: L2 cache: 4096K
  132. CPU 1/1 -> Node 0
  133. CPU: Physical Processor ID: 0
  134. CPU: Processor Core ID: 1
  135. CPU1: Thermal monitoring handled by SMI
  136. Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0a
  137. Brought up 2 CPUs
  138. migration_cost=11
  139. NET: Registered protocol family 16
  140. ACPI: bus type pci registered
  141. PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
  142. PCI: Not using MMCONFIG.
  143. PCI: Using configuration type 1
  144. evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
  145. evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 10 Runtime GPEs in this block
  146. Completing Region/Field/Buffer/Package initialization:................................................................
  147. Initialized 26/27 Regions 0/0 Fields 27/27 Buffers 11/13 Packages (1010 nodes)
  148. Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
  149. ACPI: Please test with "acpi_osi=!Linux"
  150. Please send dmidecode to linux-acpi@vger.kernel.org
  151. .
  152. Executed 1 _INI methods requiring 0 _STA executions (examined 76 objects)
  153. ACPI: Interpreter enabled
  154. ACPI: (supports S0 S3 S4 S5)
  155. ACPI: Using IOAPIC for interrupt routing
  156. ACPI: PCI Root Bridge [PCI0] (0000:00)
  157. PCI: Probing PCI hardware (bus 00)
  158. PCI: Transparent bridge - 0000:00:1e.0
  159. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  160. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
  161. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  162. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  163. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  164. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
  165. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
  166. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
  167. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  168. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
  169. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  170. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
  171. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  172. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  173. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  174. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  175. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  176. Linux Plug and Play Support v0.97 (c) Adam Belay
  177. pnp: PnP ACPI init
  178. ACPI: bus type pnp registered
  179. pnp: PnP ACPI: found 11 devices
  180. ACPI: ACPI bus type pnp unregistered
  181. PCI: Using ACPI for IRQ routing
  182. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  183. PCI-GART: No AMD northbridge found.
  184. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  185. hpet0: 3 64-bit timers, 14318180 Hz
  186. ACPI: RTC can wake from S4
  187. pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
  188. pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
  189. pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
  190. pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
  191. pnp: 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved
  192. PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
  193. PCI: Bridge: 0000:00:01.0
  194.   IO window: 2000-2fff
  195.   MEM window: c4000000-c6ffffff
  196.   PREFETCH window: d0000000-dfffffff
  197. PCI: Bridge: 0000:00:1c.0
  198.   IO window: 3000-3fff
  199.   MEM window: bc000000-bfffffff
  200.   PREFETCH window: cc000000-cdffffff
  201. PCI: Bridge: 0000:00:1c.1
  202.   IO window: 4000-4fff
  203.   MEM window: f0000000-f3ffffff
  204.   PREFETCH window: fa000000-fbffffff
  205. PCI: Bridge: 0000:00:1c.2
  206.   IO window: 5000-5fff
  207.   MEM window: f4000000-f7ffffff
  208.   PREFETCH window: fc000000-fdffffff
  209. PCI: Bridge: 0000:00:1c.3
  210.   IO window: 6000-6fff
  211.   MEM window: b4000000-b7ffffff
  212.   PREFETCH window: c8000000-c9ffffff
  213. PCI: Bridge: 0000:00:1c.4
  214.   IO window: disabled.
  215.   MEM window: disabled.
  216.   PREFETCH window: disabled.
  217. PCI: Bridge: 0000:00:1c.5
  218.   IO window: disabled.
  219.   MEM window: f8000000-f80fffff
  220.   PREFETCH window: disabled.
  221. PCI: Bridge: 0000:00:1e.0
  222.   IO window: disabled.
  223.   MEM window: f8100000-f81fffff
  224.   PREFETCH window: disabled.
  225. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  226. PCI: Setting latency timer of device 0000:00:01.0 to 64
  227. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
  228. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  229. ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
  230. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  231. ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
  232. PCI: Setting latency timer of device 0000:00:1c.2 to 64
  233. ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
  234. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  235. ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
  236. PCI: Setting latency timer of device 0000:00:1c.4 to 64
  237. ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
  238. PCI: Setting latency timer of device 0000:00:1c.5 to 64
  239. PCI: Setting latency timer of device 0000:00:1e.0 to 64
  240. NET: Registered protocol family 2
  241. Time: hpet clocksource has been installed.
  242. IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  243. TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
  244. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  245. TCP: Hash tables configured (established 262144 bind 65536)
  246. TCP reno registered
  247. Simple Boot Flag at 0x38 set to 0x1
  248. audit: initializing netlink socket (disabled)
  249. audit(1194045218.592:1): initialized
  250. Total HugeTLB memory allocated, 0
  251. VFS: Disk quotas dquot_6.5.1
  252. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  253. io scheduler noop registered
  254. io scheduler anticipatory registered
  255. io scheduler deadline registered
  256. io scheduler cfq registered (default)
  257. Boot video device is 0000:01:00.0
  258. PCI: Setting latency timer of device 0000:00:01.0 to 64
  259. assign_interrupt_mode Found MSI capability
  260. Allocate Port Service[0000:00:01.0:pcie00]
  261. Allocate Port Service[0000:00:01.0:pcie02]
  262. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  263. assign_interrupt_mode Found MSI capability
  264. Allocate Port Service[0000:00:1c.0:pcie00]
  265. Allocate Port Service[0000:00:1c.0:pcie02]
  266. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  267. assign_interrupt_mode Found MSI capability
  268. Allocate Port Service[0000:00:1c.1:pcie00]
  269. Allocate Port Service[0000:00:1c.1:pcie02]
  270. PCI: Setting latency timer of device 0000:00:1c.2 to 64
  271. assign_interrupt_mode Found MSI capability
  272. Allocate Port Service[0000:00:1c.2:pcie00]
  273. Allocate Port Service[0000:00:1c.2:pcie02]
  274. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  275. assign_interrupt_mode Found MSI capability
  276. Allocate Port Service[0000:00:1c.3:pcie00]
  277. Allocate Port Service[0000:00:1c.3:pcie02]
  278. PCI: Setting latency timer of device 0000:00:1c.4 to 64
  279. assign_interrupt_mode Found MSI capability
  280. Allocate Port Service[0000:00:1c.4:pcie00]
  281. Allocate Port Service[0000:00:1c.4:pcie02]
  282. PCI: Setting latency timer of device 0000:00:1c.5 to 64
  283. assign_interrupt_mode Found MSI capability
  284. Allocate Port Service[0000:00:1c.5:pcie00]
  285. Allocate Port Service[0000:00:1c.5:pcie02]
  286. vesafb: framebuffer at 0xc5000000, mapped to 0xffffc20000b00000, using 3750k, total 14336k
  287. vesafb: mode is 800x600x16, linelength=1600, pages=2
  288. vesafb: scrolling: redraw
  289. vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  290. bootsplash 3.1.6-2004/03/31: looking for picture...
  291. bootsplash: silentjpeg size 78734 bytes
  292. bootsplash: ...found (800x600, 27773 bytes, v3).
  293. Console: switching to colour frame buffer device 96x33
  294. fb0: VESA VGA frame buffer device
  295. Real Time Clock Driver v1.12ac
  296. hpet_resources: 0xfed00000 is busy
  297. Non-volatile memory driver v1.2
  298. Linux agpgart interface v0.102 (c) Dave Jones
  299. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  300. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  301. serio: i8042 KBD port at 0x60,0x64 irq 1
  302. serio: i8042 AUX port at 0x60,0x64 irq 12
  303. mice: PS/2 mouse device common for all mice
  304. input: AT Translated Set 2 keyboard as /class/input/input0
  305. input: PC Speaker as /class/input/input1
  306. input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
  307. NET: Registered protocol family 1
  308. Freeing unused kernel memory: 316k freed
  309. ACPI: SSDT 7FED9556, 02BC (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
  310. Parsing all Control Methods:
  311. Table [SSDT](id 008F) - 6 Objects with 0 Devices 3 Methods 0 Regions
  312. ACPI: SSDT 7FED9027, 04AA (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
  313. Parsing all Control Methods:
  314. Table [SSDT](id 0090) - 1 Objects with 0 Devices 1 Methods 0 Regions
  315. Monitor-Mwait will be used to enter C-1 state
  316. Monitor-Mwait will be used to enter C-2 state
  317. Monitor-Mwait will be used to enter C-3 state
  318. ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
  319. ACPI: Processor [CPU0] (supports 8 throttling states)
  320. ACPI: SSDT 7FED9812, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
  321. Parsing all Control Methods:
  322. Table [SSDT](id 0096) - 4 Objects with 0 Devices 4 Methods 0 Regions
  323. ACPI: SSDT 7FED94D1, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
  324. Parsing all Control Methods:
  325. Table [SSDT](id 0097) - 1 Objects with 0 Devices 1 Methods 0 Regions
  326. ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
  327. ACPI: Processor [CPU1] (supports 8 throttling states)
  328. SCSI subsystem initialized
  329. libata version 3.00 loaded.
  330. ahci 0000:00:1f.2: version 3.0
  331. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
  332. ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
  333. ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
  334. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  335. scsi0 : ahci
  336. scsi1 : ahci
  337. scsi2 : ahci
  338. ata1: SATA max UDMA/133 cmd 0xffffc20000ad0100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4344
  339. ata2: SATA max UDMA/133 cmd 0xffffc20000ad0180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4344
  340. ata3: SATA max UDMA/133 cmd 0xffffc20000ad0200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4344
  341. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  342. ata1.00: ATA-7: ST9120823AS, 3.AAB, max UDMA/133
  343. ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
  344. ata1.00: configured for UDMA/133
  345. ata2: SATA link down (SStatus 0 SControl 300)
  346. ata3: SATA link down (SStatus 0 SControl 300)
  347. scsi 0:0:0:0: Direct-Access     ATA      ST9120823AS      3.AA PQ: 0 ANSI: 5
  348. ata_piix 0000:00:1f.1: version 2.11
  349. ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
  350. PCI: Setting latency timer of device 0000:00:1f.1 to 64
  351. scsi3 : ata_piix
  352. scsi4 : ata_piix
  353. ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118a0 irq 14
  354. ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118a8 irq 15
  355. ata4.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33
  356. ata4.00: configured for UDMA/33
  357. scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S082H  SB00 PQ: 0 ANSI: 5
  358. BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
  359. usbcore: registered new interface driver usbfs
  360. usbcore: registered new interface driver hub
  361. usbcore: registered new device driver usb
  362. USB Universal Host Controller Interface driver v3.0
  363. ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
  364. PCI: Setting latency timer of device 0000:00:1a.0 to 64
  365. uhci_hcd 0000:00:1a.0: UHCI Host Controller
  366. uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  367. uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
  368. usb usb1: new device found, idVendor=0000, idProduct=0000
  369. usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
  370. usb usb1: Product: UHCI Host Controller
  371. usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
  372. usb usb1: SerialNumber: 0000:00:1a.0
  373. usb usb1: configuration #1 chosen from 1 choice
  374. hub 1-0:1.0: USB hub found
  375. hub 1-0:1.0: 2 ports detected
  376. sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
  377. sd 0:0:0:0: [sda] Write Protect is off
  378. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  379. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  380. sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
  381. sd 0:0:0:0: [sda] Write Protect is off
  382. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  383. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  384.  sda: sda1 sda2 < sda5 sda6 sda7 >
  385. sd 0:0:0:0: [sda] Attached SCSI disk
  386. ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
  387. PCI: Setting latency timer of device 0000:00:1a.1 to 64
  388. uhci_hcd 0000:00:1a.1: UHCI Host Controller
  389. uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
  390. uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
  391. usb usb2: new device found, idVendor=0000, idProduct=0000
  392. usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
  393. usb usb2: Product: UHCI Host Controller
  394. usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
  395. usb usb2: SerialNumber: 0000:00:1a.1
  396. usb usb2: configuration #1 chosen from 1 choice
  397. hub 2-0:1.0: USB hub found
  398. hub 2-0:1.0: 2 ports detected
  399. ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
  400. PCI: Setting latency timer of device 0000:00:1a.7 to 64
  401. ehci_hcd 0000:00:1a.7: EHCI Host Controller
  402. ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
  403. ehci_hcd 0000:00:1a.7: debug port 1
  404. PCI: cache line size of 32 is not supported by device 0000:00:1a.7
  405. ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
  406. ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  407. usb usb3: new device found, idVendor=0000, idProduct=0000
  408. usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
  409. usb usb3: Product: EHCI Host Controller
  410. usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
  411. usb usb3: SerialNumber: 0000:00:1a.7
  412. usb usb3: configuration #1 chosen from 1 choice
  413. hub 3-0:1.0: USB hub found
  414. hub 3-0:1.0: 4 ports detected
  415. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
  416. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  417. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  418. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
  419. ehci_hcd 0000:00:1d.7: debug port 1
  420. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  421. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
  422. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  423. usb usb4: new device found, idVendor=0000, idProduct=0000
  424. usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
  425. usb usb4: Product: EHCI Host Controller
  426. usb usb4: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
  427. usb usb4: SerialNumber: 0000:00:1d.7
  428. usb usb4: configuration #1 chosen from 1 choice
  429. hub 4-0:1.0: USB hub found
  430. hub 4-0:1.0: 6 ports detected
  431. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
  432. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  433. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  434. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
  435. uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
  436. usb usb5: new device found, idVendor=0000, idProduct=0000
  437. usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
  438. usb usb5: Product: UHCI Host Controller
  439. usb usb5: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
  440. usb usb5: SerialNumber: 0000:00:1d.0
  441. usb usb5: configuration #1 chosen from 1 choice
  442. hub 5-0:1.0: USB hub found
  443. hub 5-0:1.0: 2 ports detected
  444. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
  445. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  446. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  447. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
  448. uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
  449. usb usb6: new device found, idVendor=0000, idProduct=0000
  450. usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
  451. usb usb6: Product: UHCI Host Controller
  452. usb usb6: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
  453. usb usb6: SerialNumber: 0000:00:1d.1
  454. usb usb6: configuration #1 chosen from 1 choice
  455. hub 6-0:1.0: USB hub found
  456. hub 6-0:1.0: 2 ports detected
  457. usb 3-2: new high speed USB device using ehci_hcd and address 2
  458. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  459. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  460. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  461. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
  462. uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
  463. usb usb7: new device found, idVendor=0000, idProduct=0000
  464. usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
  465. usb usb7: Product: UHCI Host Controller
  466. usb usb7: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
  467. usb usb7: SerialNumber: 0000:00:1d.2
  468. usb usb7: configuration #1 chosen from 1 choice
  469. hub 7-0:1.0: USB hub found
  470. hub 7-0:1.0: 2 ports detected
  471. usb 3-2: new device found, idVendor=04f2, idProduct=b018
  472. usb 3-2: new device strings: Mfr=2, Product=1, SerialNumber=3
  473. usb 3-2: Product: USB 2.0 Camera
  474. usb 3-2: Manufacturer: Chicony Electronics Co., Ltd.
  475. usb 3-2: SerialNumber: SN0001
  476. usb 3-2: configuration #1 chosen from 1 choice
  477. swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
  478. swsusp: Basic memory bitmaps created
  479. swsusp: Basic memory bitmaps freed
  480. Attempting manual resume
  481. kjournald starting.  Commit interval 5 seconds
  482. EXT3 FS on sda6, internal journal
  483. EXT3-fs: mounted filesystem with ordered data mode.
  484. usb 2-1: new full speed USB device using uhci_hcd and address 2
  485. usb 2-1: new device found, idVendor=0a5c, idProduct=2101
  486. usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
  487. usb 2-1: Product: Foxconn Bluetooth 2.0 plus EDR
  488. usb 2-1: Manufacturer: Broadcom Corp
  489. usb 2-1: configuration #1 chosen from 1 choice
  490. usb 2-2: new full speed USB device using uhci_hcd and address 3
  491. usb 2-2: new device found, idVendor=147e, idProduct=2016
  492. usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
  493. usb 2-2: Product: Fingerprint Sensor   
  494. usb 2-2: Manufacturer: TouchStrip       
  495. usb 2-2: configuration #1 chosen from 1 choice
  496. sd 0:0:0:0: Attached scsi generic sg0 type 0
  497. scsi 3:0:0:0: Attached scsi generic sg1 type 5
  498. input: Power Button (FF) as /class/input/input3
  499. ACPI: Power Button (FF) [PWRF]
  500. input: Lid Switch as /class/input/input4
  501. ACPI: Lid Switch [LID0]
  502. input: Power Button (CM) as /class/input/input5
  503. ACPI: Power Button (CM) [PWRB]
  504. tg3.c:v3.77 (May 31, 2007)
  505. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
  506. PCI: Setting latency timer of device 0000:04:00.0 to 64
  507. Bluetooth: Core ver 2.11
  508. NET: Registered protocol family 31
  509. Bluetooth: HCI device and connection manager initialized
  510. Bluetooth: HCI socket layer initialized
  511. Bluetooth: HCI USB driver ver 2.9
  512. usbcore: registered new interface driver hci_usb
  513. ACPI: AC Adapter [ACAD] (off-line)
  514. rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
  515. rtc_cmos: probe of 00:08 failed with error -16
  516. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  517. Uniform CD-ROM driver Revision: 3.20
  518. sr 3:0:0:0: Attached scsi CD-ROM sr0
  519. iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0
  520. iwl4965: Copyright(c) 2003-2007 Intel Corporation
  521. ACPI: Battery Slot [BAT1] (battery present)
  522. Linux video capture interface: v2.00
  523. sdhci: Secure Digital Host Controller Interface driver
  524. sdhci: Copyright(c) Pierre Ossman
  525. uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
  526. usbcore: registered new interface driver uvcvideo
  527. USB Video Class driver (v0.1.0)
  528. Bluetooth: L2CAP ver 2.8
  529. Bluetooth: L2CAP socket layer initialized
  530. Bluetooth: RFCOMM socket layer initialized
  531. Bluetooth: RFCOMM TTY layer initialized
  532. Bluetooth: RFCOMM ver 1.8
  533. eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:22:90:bb
  534. eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
  535. eth0: dma_rwctrl[76180000] dma_mask[64-bit]
  536. ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
  537. PCI: Setting latency timer of device 0000:0c:00.0 to 64
  538. iwl4965: Detected Intel Wireless WiFi Link 4965AGN
  539. ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
  540. sdhci: SDHCI controller found at 0000:0e:06.1 [1180:0822] (rev 22)
  541. ACPI: PCI Interrupt 0000:0e:06.1[B] -> GSI 23 (level, low) -> IRQ 23
  542. mmc0: SDHCI at 0xf8100800 irq 23 DMA
  543. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
  544. PCI: Setting latency timer of device 0000:00:1b.0 to 64
  545. hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
  546. iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
  547. wmaster0: Selected rate control algorithm 'iwl-4965-rs'
  548. ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 22
  549. ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f8100000-f81007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
  550. Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
  551. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
  552. loop: module loaded
  553. kjournald starting.  Commit interval 5 seconds
  554. EXT3 FS on sda7, internal journal
  555. EXT3-fs: mounted filesystem with ordered data mode.
  556. ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f77b24003bd]
  557. fuse init (API version 7.8)
  558. AppArmor: AppArmor initialized
  559. audit(1194045233.368:2):  type=1505 info="AppArmor initialized" pid=2268
  560. IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
  561. ata1.00: exception Emask 0x2 SAct 0x4 SErr 0x0 action 0x2 frozen
  562. ata1.00: spurious completions during NCQ issue=0x0 SAct=0x4 FIS=004040a1:00000001
  563. ata1.00: cmd 60/28:10:8c:02:9b/00:00:08:00:00/40 tag 2 cdb 0x0 data 20480 in
  564.          res 40/00:10:8c:02:9b/00:00:08:00:00/40 Emask 0x2 (HSM violation)
  565. ata1: soft resetting link
  566. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  567. ata1.00: configured for UDMA/133
  568. ata1: EH complete
  569. sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
  570. sd 0:0:0:0: [sda] Write Protect is off
  571. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  572. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  573. audit(1194038044.575:3): audit_pid=3056 old=0 by auid=4294967295
  574. PM: Writing back config space on device 0000:04:00.0 at offset c (was c7d60000, writing 0)
  575. PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 40100506, writing 40100106)
  576. ata1.00: exception Emask 0x2 SAct 0x11 SErr 0x0 action 0x2 frozen
  577. ata1.00: spurious completions during NCQ issue=0x1 SAct=0x11 FIS=004040a1:00000040
  578. ata1.00: cmd 60/28:00:4c:5b:5f/00:00:06:00:00/40 tag 0 cdb 0x0 data 20480 in
  579.          res 40/00:30:44:5b:5f/00:00:06:00:00/40 Emask 0x2 (HSM violation)
  580. ata1.00: cmd 60/08:20:cc:57:69/00:00:08:00:00/40 tag 4 cdb 0x0 data 4096 in
  581.          res 40/00:30:44:5b:5f/00:00:06:00:00/40 Emask 0x2 (HSM violation)
  582. ata1: soft resetting link
  583. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  584. ata1.00: configured for UDMA/133
  585. ata1: EH complete
  586. sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
  587. sd 0:0:0:0: [sda] Write Protect is off
  588. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  589. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  590. NET: Registered protocol family 10
  591. lo: Disabled Privacy Extensions
  592. ADDRCONF(NETDEV_UP): eth0: link is not ready
  593. ADDRCONF(NETDEV_UP): wlan0: link is not ready
  594. Mobile IPv6
  595. ata1.00: exception Emask 0x2 SAct 0x2 SErr 0x0 action 0x2 frozen
  596. ata1.00: spurious completions during NCQ issue=0x0 SAct=0x2 FIS=004040a1:00000001
  597. ata1.00: cmd 60/08:08:5c:d1:5e/00:00:08:00:00/40 tag 1 cdb 0x0 data 4096 in
  598.          res 40/00:08:5c:d1:5e/00:00:08:00:00/40 Emask 0x2 (HSM violation)
  599. ata1: soft resetting link
  600. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  601. ata1.00: configured for UDMA/133
  602. ata1: EH complete
  603. sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
  604. sd 0:0:0:0: [sda] Write Protect is off
  605. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  606. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  607. bootsplash: status on console 0 changed to on
  608. ata1.00: NCQ disabled due to excessive errors
  609. ata1.00: exception Emask 0x2 SAct 0x4 SErr 0x0 action 0x2 frozen
  610. ata1.00: spurious completions during NCQ issue=0x0 SAct=0x4 FIS=004040a1:00000001
  611. ata1.00: cmd 60/18:10:1c:75:a9/00:00:06:00:00/40 tag 2 cdb 0x0 data 12288 in
  612.          res 40/00:10:1c:75:a9/00:00:06:00:00/40 Emask 0x2 (HSM violation)
  613. ata1: soft resetting link
  614. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  615. ata1.00: configured for UDMA/133
  616. ata1: EH complete
  617. sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
  618. sd 0:0:0:0: [sda] Write Protect is off
  619. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  620. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  621. usb 4-1: new high speed USB device using ehci_hcd and address 2
  622. usb 4-1: new device found, idVendor=0951, idProduct=1600
  623. usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=3
  624. usb 4-1: Product: DataTraveler II
  625. usb 4-1: Manufacturer: Kingston
  626. usb 4-1: SerialNumber: 5B6B178A00DD
  627. usb 4-1: configuration #1 chosen from 1 choice
  628. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  629. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  630. Initializing USB Mass Storage driver...
  631. scsi5 : SCSI emulation for USB Mass Storage devices
  632. usb-storage: device found at 2
  633. usb-storage: waiting for device to settle before scanning
  634. usbcore: registered new interface driver usb-storage
  635. USB Mass Storage support registered.
  636. scsi 5:0:0:0: Direct-Access     Kingston DataTraveler II  PMAP PQ: 0 ANSI: 0 CCS
  637. sd 5:0:0:0: [sdb] 1014784 512-byte hardware sectors (520 MB)
  638. sd 5:0:0:0: [sdb] Write Protect is off
  639. sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
  640. sd 5:0:0:0: [sdb] Assuming drive cache: write through
  641. sd 5:0:0:0: [sdb] 1014784 512-byte hardware sectors (520 MB)
  642. sd 5:0:0:0: [sdb] Write Protect is off
  643. sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
  644. sd 5:0:0:0: [sdb] Assuming drive cache: write through
  645.  sdb: sdb1
  646. sd 5:0:0:0: [sdb] Attached SCSI removable disk
  647. sd 5:0:0:0: Attached scsi generic sg2 type 0
  648. usb-storage: device scan complete
  649. NET: Registered protocol family 17
  650. wlan0: Initial auth_alg=0
  651. wlan0: authenticate with AP 00:13:49:78:e0:22
  652. wlan0: RX authentication from 00:13:49:78:e0:22 (alg=0 transaction=2 status=0)
  653. wlan0: authenticated
  654. wlan0: associate with AP 00:13:49:78:e0:22
  655. wlan0: RX AssocResp from 00:13:49:78:e0:22 (capab=0x451 status=0 aid=1)
  656. wlan0: associated
  657. ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  658. wlan0: no IPv6 routers present
  659. wlan0: no IPv6 routers present
  660. usb 4-1: USB disconnect, address 2

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will expire by default in one month. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

fantasy-obligation
fantasy-obligation
fantasy-obligation